COMET K 250 11/160 M Classic - 160 bar - Pressure washer

Product description

;1,400 rpm (11 l / minute) by turning in just 660 l / h is able to deliver pressure of 160 bar, is mainly characterized by the low number of revolutions of the pumping unit which, at a COMET K 250 11/160 M high-pressure cleaner The professional-grade this feature is synonymous with the long life of the pump and the motor since the degree of wear is considerably reduced.
devices integrated in this model have a further guarantee of longevity: these systems allow the pumping unit to be activated only during the water supply, when the lever is released. gun to stop the flow the engine is switched off and the pressure is zero (reduced energy consumption!).TOTAL-STOP and EASY-START The
) is protected by a layer of paint and a thermostat that stops its operation in case of excessive heating;requires a 4.5 Kw power grid ( 3,300 W 4-pole motor The , provided with a sight that allows to check the oil level.brass head and 3 ceramic pistons with of the LW-K type is pump the
The pressure can be controlled by a pressure gauge applied to the pump and regulated by acting on an integrated professional valve located on the front.
The maintenance of this machine is very practical since it is sufficient to remove the front part of the fairing to have convenient access to all the vital parts.
from which the cleaning liquids are extracted on request while working in low pressuretank 3.5 liter When needed, it is possible to use detergents as the pressure washer has an integrated but removable
This machine can be used both horizontally and vertically and is equipped with 2 large 22 cm Ø wheels for easy movement even on uneven ground or steps. The support for the power cable is housed on the back of the handle, while the front of the delivery hose reel is available on the front and can be purchased as an option. At the base of the handle for transport are also present convenient compartments in which the lance and the gun can be stored.
This model is equipped as standard with a dispensing gun, an angled spout with a cleaning head, a nozzle and a 10 m delivery pipe.