Power tools have tremendous potential in the work equipment market powered by electricity or by a battery. They are the essential elements in the daily life of hobbyists, fans of "DIY", artisans, professionals, plumbers, electricians, carpenters, masons, mechanics, coachbuilders ... there is no manual tool that has not been replaced by an electric tool, improving performance, achieving unimaginable results. On our site you will find what it can do for you, the companies we have trusted are the best in the industry, the products have different characteristics to meet the needs of very diverse customers and offer everyone their own dimension. Many of our power tools can be connected to an air compressor for more specific and particular applications.
Those powered by battery have given a further impulse to the world of power tools: the ability to use a tool anywhere without worrying about having a connection to the electricity grid, in any type of situation or environment has opened fronts and removed limits to many applications.
Powertools
Read More...
-
LAVOR Sprinter Floor Scrubber Cleaner
in just 5 minutes he manages to clean a surface of about 100 m2 - n. 4 bottles of 100 ml detergent included -- Power supply 230 V- 50 Hz
- Hourly yield 1015 m²
- Completely reclining
- n. 4 Detergent x 100 ml
-
Milwaukee PH 26 TX Electric hammer drill
800W motor - FIXTE chuck - SDS-Plus connection - 2,4 J stroke energy- 2,6 kg weight- 800W motor
- SDS-Plus connection
- Impact energy 2.4 J
- FIXTEC chuck
- Weight 2.6 kg
-
Proxxon WP / E corner polisher art. 28660
finish rough surfaces, rust removal, polishing- 230 V power supply
- Engine revolutions from 800 to 2800 / min
- Length 270 mm
- Weight 0.720 kg
-
Ryobi RAG600-115G angle grinder
600W motor - disc diam. 115 - M14 thread -- 600W motor
- Disc diameter 115 mm
- No-load speed 13000 rpm
- M14 post connection
- Net weight 2.00 kg
-
Telwin Tecnica 211 / S 816122 Inverter MMA TIG Welder 180A
Power 180A - In plastic case with electrode holder, earth cable- Complete with MMA welding accessories and plastic carry case.
- Power consumption: 2.9-5.3 Kw
- Single-phase mains voltage: 230 V
- ARC and TIG welding
- MMA electrode diameter: 1.6-4 mm
-
Makita DLX2131JX1 Cordless Impact Wrench 1/4 " and Combi Driver - 3 Batteries 18V
Screwdriver - Cordless drill with percussion - charger and case included- DHP482RF3J Combi Drill
- DTD152RTJ Impact Wrench
- n. 3 18 V 3 Ah batteries
- Battery charger
- Makpac case
-
Ryobi R18AG-0 18V Cordless Angle Grinder
18 V battery (not included) - disk diam. 115 -- No-load speed 0-7500 rpm
- M14 Spindle size
- 18 V battery (not included)
- Disc diameter 115 mm
- Net weight 2.20 kg
-
Proxxon chuck block 28092-185 for 28092 fret saw
single piece- Proxxon manufacturer
- Code 28092-185
- Description Single knife holder block
- Suitable for DSH fretwork saw
-
Einhell CC-PO 90 Polisher for cars
power 90 W - pad diam. 240 mm -- Power 90 W
- Backing pad diam. 240 mm
- Oscillations 3700 / min.
- Weight 2.0 kg
-
Ryobi RTS1800EF-G Table Saw
1800 W motor - extension, base and wheels -- Motor power 1800 W
- 230 V power supply
- Blade 254 mm
- Cuts from + 60 ° to -60 °
- Net weight 26.8 kg
-
RYOBI RSW1240G Scroll Saw
motor 125 W - max cut 52 mm - depth 405 mm -- Power 125 W
- Max cutting 52 mm
- Variable speed 550-1600 rpm
- 1 blade, Allen wrench, blade adapter
-
Makita Battery 18V 5.0 Ah BL1850B lithium ion
no memory effect - minimum temperature use -20 ° C -- Battery 18 V 5.0 Ah lithium ions
- Compatible with DC18RC charger
- Weight 0.640 kg
-
Einhell TC-BD 350 Column Drill Press
motor 350 W - 5 speed positions - inclinable plane -45 ° / + 45 °- Depth drilling 50 mm
- Diameter tips from 1.5 to 13 mm
- n. 5 Speed
- Removal 104 mm
- Weight 15.40 kg
-
Proxxon LHW/A Cordless Long neck grinder
n. 1 10.8V battery - LG / A charger - plastic case -- Lithium-ion battery 10.8V
- LG / A charger
- n. 3 Accessories
- Plastic case
- Weight: 0,800 kg
-
Einhell 2093095 Headset set for polisher
1 cotton cap and 1 synthetic cap - diam. 250 mm - pack of 2 pcs.- 1 Cotton cap / 1 synthetic
- Disk: 250 mm
- Compatible on: Einhell CC-PO 90
- N. 2 pieces
-
Makita HR2470 Rotary Hammer 780W
power 780 W - quick release spindle - reversible -- Motor power 780 W
- 230 V power supply
- No-load speed 0-1100 rpm
- Strokes per minute 0-4500
- Weight (EPTA) 2.9 kg
-
Makita GA9020 Angle Grinder 240V
power 2200 W- 230 V power supply
- Power 2200 W
- Speed 6600 rpm
- Weight (EPTA) 5.80 kg
- 9 Inch Disk
-
FEMI F40-562 Scroll Saw
With tool kit and flexible shaft included- Power: 125 W.
- Number of blade strokes: 550-1600 c / min.
- Inclination: 0 - 45 °.
- Cutting height: 50 mm.
-
TELWIN PRO START 2824 Car Jump Starter
With booster function for immediate ignition- 12 V socket for cigarette lighter.
- 230V power supply included.
- Status display by LED.
- Automatic overload protection.
- Reverse polarity alarm.
-
Telwin Force 125 Inverter MMA Welder 80A
Power 80A - cardboard case, 2 mt electrode holder and 2 m cable for free- Complete with MMA welding accessories and cardboard carry case.
- Single-phase mains voltage: 230 V
- Power consumption: 2.3 Kw
- Power 80A
- Electrode welding diam. 1.6-2.5 mm
-
Telwin Force 145 815862 Inverter MMA Welder 130A
Power 130A - Tiger helmet mask, 2 mt electrode holder, caliper and 2 mt- Single-phase mains voltage: 230 V
- Power consumption: 3.5 Kw
-
Complete with MMA welding accessories and plastic carry case
- Power 130A
- Electrode welding diam. 1.6-3.2 mm
-
Telwin Force 165 815857 Inverter MMA Welding 150A
Power 150A - In plastic case with 2 mt electrode holder, 2 mt mass cable and hand mask- Complete with MMA welding accessories and plastic carry case
- Power consumption: 4.1 Kw
- Single-phase mains voltage: 230 V
- Electrode welding diam. 1.6-4.0 mm
- Cycle of use at 20 °: 6 min 150A
-
Telwin Force 195 815859 Inverter MMA Welder 170A
Power 170A - In plastic case - 2 mt electrode holder, 2 mt mass cable and hand mask- Single-phase mains voltage: 230 V
- Power consumption: 1.5-5Kw
- Cycle of use at 20 °: 4min 170A
- Soldering Electrode diam.1.6-4 mm
- Complete with MMA welding accessories and plastic carry case
-
Telwin Force 165 815863 - Inverter MMA Welder 150A
Power 150A - Tribe automatic LCD mask, 2.0 mt electrode holder, caliper and 2.0 mt- Maximum power consumption: 4.1 Kw Max
- Electrode welding diameter 1.6-4 mm
- Max welding thickness 10.0 mm
- Mains voltage: 230V (single phase)
- Complete with AUTOMATIC helmet and MMA welding accessories.
-
Telwin Tecnica 171 / S Inverter MMA TIG Welder 150A
Power 150A - Only welding machine not supplied with accessories- Single-phase mains voltage: 230 V
- Power consumption: 2.6-4.2 Kw
- Cycle of use at 20 °: 8.8min 150A
- Electrode and TIG welding
- MMA electrode diameter: 1.6-3.2 mm
-
Telwin Tecnica 211 / S 816022 Inverter MMA TIG Welder 180A
Power 180A - Only welding machine not supplied with accessories- Single-phase mains voltage: 230 V
- Power consumption: 2.9-5.3 Kw
- Cycle of use at 20 °: 6.5min 180A
- MMA electrode diameter: 1.6-4 mm
- TIG and ARC welding
-
Telwin Force MPGE 168 Inverter MMA Welder 150A
Power 150A - In plastic case with 2 meters electrode holder, 2m mass cable and hand mask- Single-phase mains voltage: 230 V
- Complete with MMA welding accessories and plastic carry case.
- Power consumption: 2,6 Kw
- TIG welding
- Electrode Welding diam.1.6-4 mm
-
Telwin Tecnica 188 Inverter MMA TIG Welder 150A
Power 150A - Only welding machine not supplied with accessories- Power consumption: 4.2 KW
- Adjustment range: 10 - 150 A
- Single-phase mains voltage: 230 V
- Electrode diameter: 1.6 - 4.0 mm
- TIG and electrode welding
-
Telwin Tecnica 188 Inverter MMA TIG Welder 150A
Power 150A - In plastic case with electrode holder, mass cable and hand mask- Single-phase mains voltage: 230 V
- Power consumption: 2.6 - 4.2 Kw
-
Complete with MMA welding accessories and plastic carry case
- Electrode and TIG welding
- MMA electrode diameter: 1.6-4 mm
-
Milwaukee CHS 355 Iron Miter Saw 2300W
Recommended for professional and continuous use- Power consumption: 2300W
- Power supply: single phase
- Disc diameter: 355 mm
- Weight: 18.0 Kg
- Cutting capacity: from 80 to 230 millimeters
-
Makita HP1631 Impact Drill
power 710 W - 1.5 - 13 mm self-locking spindle - reversible- 230 V power supply
- No-load speed 0-3200 rpm
- Strokes 0 - 48000
- Spindle capacity 1.5 - 13 mm
- Weight (EPTA) 1.9 kg
-
Makita BO4566 Orbital sander
power 200 W - sanding paper size 100 x 240- 230 V power supply
- Power 200 W
- Sanding paper size 100 x 240 mm
- Speed 14,000 orb / min
- Weight (EPTA) 1.20 kg
-
Makita BO3711 Orbital Sander for shutters
power 190 W - basic size 98 x 180 mm- 230 V power supply
- Power 190 W
- Sanding paper size 93 x 228 mm
- Speed 4000- 11,000 orb / min
- Weight (EPTA) 1.60 kg
-
Makita BO5041K Orbital Sander
power 300 W - abrasive disk diam. 125 mm -- 230 V power supply
- Power 300 W
- Disc size 125 mm
- Speed 4000 -12000 orb / min
- Weight (EPTA) 1.60 kg
Work tools powered by battery or wire. Suitable for all practical work, for wood or metal working, for assembly or carpentry works, light or heavy work. Products shipped by express courier and delivered within 24 hours of purchase.
Power tools: power and precision even in the most difficult working conditions
Tools that are easily transportable and electrically operated, the electric tools are equipped with a high performance integrated motor capable of making these tools the best compromise between power, precision, and robustness.
Much more practical than manual tools, these power tools can be used even in the most difficult working conditions, on-site or at home.
In fact, they can also be used for small housework and do-it-yourself activities.
Inside the new online shop of LineOnLine you can find a wide range of power tools of the best brands: from drills to grinders, from sanders to engravers to cutting tools, as well as a wide assortment of chargers and starter.
Power Tools: New Brushless technology, brushless motors for greater durability
The new Brushless technology (without brushes), has also been introduced in the world of power tools. The power is switched electronically, limiting mechanical resistance to a minimum. The dispersion of energy is minimal thanks to 4 magnetic poles which guarantee a more continuous supply and with fewer power surges.
Power tools equipped with this technology have a service life of up to 10 times longer than the old brush motors, they have a more compact case and weight, favoring the user in longer use sessions.
A brushless motor, used with the necessary precautions, can last up to the life of the electric tool, without having to bear maintenance costs.
Power Tools: many types to meet your every need
From small repairs in the home to the use for professional use: the power tools allow you to perform all kinds of work and activities, becoming excellent allies even in small household chores.
Naturally, the electric tool is better, the easier it will be to complete the job.
It is for this reason that it is always advisable to buy the most suitable power tool for your needs, carefully evaluating not only the cost but also the functionality and quality.
For small jobs at home, the most widely used power tool is without a doubt the drill. This is able to drill, with the least effort, any type of material, from wood to metal.
Most models of drills currently on the market have two speeds: the first is usually used with thick tips, while the second speed is used to make small holes.
But if the drill is perhaps the most used power tool at home, in the professional field, there are many others used power tools. Furniture factories and carpenters, for example, can not do without screwdrivers as well as sanders or grinders.
In fact, if the former is indispensable for smoothing even wooden surfaces, the latter can be particularly useful for smoothing corners and shapes of objects.
The case is different for those who work on masonry by profession or by passion. In fact, in case there is a need to make holes on concrete walls, it is recommended to use a hammer drill.
Power Tools: how to use them to the fullest
Practical and sometimes very simple to use, power tools can however also prove dangerous. It is therefore advisable to use them with the utmost care so as not to incur accidents due to carelessness. Here are some simple tips to follow:
- carefully read the user manual of the electric tool and its technical data sheet;
- choose a secure workplace;
- if it is necessary to use the electric tool outdoors, make sure that the extension cable is suitable for outdoor use;
- make sure the power cord is appropriate and that the power of the current is stable;
- Always wear protective eyewear and clothing that suits your activity.
Our tips for you: