Ribimex PRMPC211/33 212 cc self-priming petrol engine pump

The market for water pumps to extract and transport water over long distances for irrigation, watering, and clearing flooded areas is broad and diverse; the Ribimex PRMPC211/33 gasoline-powered water pump is one of the best models for demanding, prolonged work where large volumes of water need to be moved.

The structure with a tubular frame equipped with 2 large rubber wheels and a front handle covered in non-slip material allows it to be easily moved wherever needed without any problems.

It is part of the self-priming machines, and once all the startup steps have been completed, it is immediately ready for use: simply fill the pump tank with water, add fuel, and start using it. The structure is solid, robust, made with high-quality materials that ensure long-lasting performance for extended periods of use.

The Ribimex PRMPC211/33 gasoline-powered water pump is equipped with a robust, dynamic 4-stroke gasoline engine that ensures demanding work to extract fresh water from streams, tanks, wells, reservoirs for irrigating fields, flower beds, trees, gardens in areas where there is no water supply network, or to clear basements, garages, flooded areas quickly.

Additionally, the PRMPC211/33 is constructed as follows:

• Engine PT 170F 4-stroke single-cylinder 212 cc 4.6 kW, air-cooled, powerful, reliable
• OHV valves mounted on the cylinder head to provide more power to the carburetor
• Pull-cord self-winding starter that ensures ignition in any type of weather condition
• Maximum water flow rate up to 33000 liters/hour
• Maximum head of 30 meters and maximum suction height of 7 meters
• Maximum operating pressure of 2 bar
• Green gasoline tank of 3.60 liters with a cap on the top very useful for filling, engine oil tank 0.6 liters (SAE 10W-30)
• Inlet and outlet connections with 50 mm (2") threading
• Sound level 88.70 dB(A)
• Included accessories: suction valve, fittings for 2" pipes, gaskets, clamps, hex key

It is recommended to use the PRMPC211/33 water pump in environments with temperatures ranging from 5°C to 60°C; fill the fuel mixture tank with the engine off and insert the water into the appropriate compartment BEFORE turning on the machine.