Telwin Force MPGE 168 Inverter MMA Welder 150A
Power 150A - In plastic case with 2 meters electrode holder, 2m mass cable and hand mask
- Single-phase mains voltage: 230 V
- Complete with MMA welding accessories and plastic carry case.
- Power consumption: 2,6 Kw
- TIG welding
- Electrode Welding diam.1.6-4 mm
- Shipping by express courier
- Order now to receive it on 11 May 2021
The Telwin Force MPGE 168 inverter welding machine is recommended for those occasions when a motor generator is the only power source because the MPGE multiple protections of which it is supplied, such as the waveform control device, the filter against the peaks in input, and the stabilization of the oscillations, guarantee high performances even with unsteady tensions. The types of electrodes that can be used are many (cast iron, rutile, stainless steel, basic, etc.). It is a small and light product that allows easy handling; ensures a high stability of the welding current if there are high oscillations of the supply voltage.
Also this model has all the control and protection devices that distinguish the Force line: arc force, hot start, anti-stick, thermostatic protections, overvoltage, undervoltage and overcurrent.
It is complete with accessories for MMA welding of materials with a maximum thickness of 1.0 mm, electrode holder 2 mt, cable 2 m . 16 mm , brush and mask, contained in a plastic case.
|Mains voltage (V50-60Hz)||230-1ph|
|Current adjustment range (A)||10-150|
|20 ° cycle of use||6 min. 150A|
|Maximum Current (A)||140 - 7%|
|Max. No-load voltage (V)||72|
|Current consumption (A)||31|
|Absorbed power (Kw)||4.1|
|Min. Power generator (Kw)||6|
|Network fuse (A)||16|
|MMA electrode diameter (mm)||1.6-4|
|Product dimensions (mm)||380x420x170|
With the purchase you will receive:
- a pack of 100 2.0mm Telwin electrodes
- a package of 50 Telwin 2.5mm electrodes
- a pair of Cofra welder gloves
|Welding machines brand||Telwin|